Allied Data Technologies 813 Manual de instalación descargar pdf (Pagina 25)

Configuring RFC1483 Routed.

1. Select RFC1483 Routed as profile

type and click on OK.

2. Set the LAN TCP/IP

parameters.

(CopperJet 81x IP-Address)

Set the interface type.

USB when the CopperJet 81x is

connected with a USB cable.

Ethernet when the CopperJet 81x

is connected with a Ethernet

cable.

Select the Line modulation.

(ADSL connection Protocol)

-Multimode : Modem will detect the Modulation offered by the CO (Preferred)

-T1.413 : ANSI ADSL Standard

-G.Lite : G.992.2

-G.Dmt : G.992.1 Annex A

Set the ATM PVC (Virtual Circuit) parameters.

-VPI : VPI Channel Number

-VCI : VCI Channel Number

-PCR : Peak Cell Rate

Encapsulation.

-LLC : Logical Link Control

-VcMux : Null Encapsulation

Set the WAN TCP/IP parameters. ( CopperJet 81x WAN IP-Address)

Set NAT (Network Address Translation) if needed.

Allied Data Technologies 25

CopperJet 81x

CJT 81x 02-10-2001 11:45 Pagina 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Sin comentarios

Allied Data Technologies 813 Manual de instalación Pagina 25