Allied Data Technologies 813 Manual de instalación descargar pdf (Pagina 23)

Configuring RFC1483 Bridged.

1. Select RFC1483 Bridged as profile

type and click on OK.

2. Set the TCP/IP parameters.

Optional: an IP Address and Subnetmask is only needed for further management use.

Select the Line modulation. (ADSL connection Protocol)

-Multimode : Modem will detect

the Modulation

offered by the CO

(Preferred)

-T1.413 : ANSI ADSL Standard

-G.Lite : G.992.2

-G.Dmt : G.992.1 Annex A

Set the ATM PVC (Virtual Circuit)

parameters.

-VPI : VPI Channel Number

-VCI : VCI Channel Number

-PCR : Peak Cell Rate

Select the forwarded Packet types.

-None : This will forward

all packets

-Forward PPP: This will only forward

PPP packets

-Forward IP : This will only forward

IP packets

Select spanning tree if this

is required.

Allied Data Technologies 23

CopperJet 81x

CJT 81x 02-10-2001 11:45 Pagina 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Sin comentarios

Allied Data Technologies 813 Manual de instalación Pagina 23